Baumer Flex Bar HRT Uživatelský manuál stáhnout pdf (Strana 6)

Page 6 Design and speciﬁ cations subject to change without notice

Installation Manualwww.baumerprocess.com

Ex-data

Supply range 6.5...35 VDC

Temperature class T1...T4: -10 < T

amb

< 85°C

T5: -10 < T

amb

< 60°C

Ex nA II T4/T5, ATEX II 3G

Electrical Connection

Electrical Connection Cable diameter Torque

mm Nm

Gland M20, plast 8...13 8

Plug DIN-B 6...8 4

Plug DIN-A 8...10 3

Gland M16 3...9 8

Plug M12 - 4

A FlexBar HRT with the type number 81 6x3 xxx xxxx is Ex nA II

T4/T5 and ATEX II 3G approved for application in hazardous areas in

accordance with the current EU-directives.

The FlexBar HRT must be installed in accordance with prevailing

guidelines for zone 2 without a barrier.

Ex nA - Installation

FlexBar HRT FlexView display Power

(Optional) Supply

230 VAC

24 VDC

4...20 mA

+ -

Opto-relay

Voltage, standard Max. 230 VAC

Voltage, GL-approved Max. 60 VAC

DC-voltage Max. 50 VDC

Current, continuously Max. 50 mA

Current, pulse Max. 500 mA

Relay function Set/reset

If the FlexBar HRT has the relay option (type numbers 81 62 3xxx

xxxx and 81 64 3xxx xxxx) the connections to the relay must be carried

out according to the rules for an intrinsically safe installation.

The FlexBar HRT must be connected in the 4...20 mA loop circuit only.

Warning: If the FlexBar HRT is to be installed in ambient

temperature exceeding 70°C a proper cable should be installed.

- +

1 2 3 4 5 6 7 8

Komentáře k této Příručce

Žádné komentáře

Baumer Flex Bar HRT Uživatelský manuál Strana 6

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje Baumer Flex Bar HRT