Baumer CombiLyz AFI4 Uživatelský manuál stáhnout pdf (Strana 11)

www.baumer.com

Operators Instruction: 11126179 00 Page 11 / 36

Operators Instruction

Programming the AFI4 with the FlexProgram

If user defined concentration is selected you may enter the number of

point (2...30 points) in which the media is to be calibrated.

Fill in conductivity in µS/cm and % for each point.

See example to the right.

Screen Output (when conductivity is selected in DTM setup)

Setting the temperature output range (4...20 mA)

Setting the conductivity µS/cm or mS/cm output 4 ranges (4...20 mA)

The ranges set under Input will appear, however can be overwritten if

wanted.

The transmitter error signal can be directed to either temperature out-

put or conductivity output or both outputs.

Screen Output

(when concentration is selected in DTM setup)

Setting the temperature output range (4...20 mA)

Setting the concentration % output 4 ranges (4...20 mA)

The ranges set under Input will appear, however can be overwritten if

wanted.

The transmitter error signal can be directed to either temperature out-

put or conductivity output or both outputs.

Screen Media screen

A product label can be entered in field “Label” e.g. Milk

and the values for the media entered in µS/cm in the two following

fields. Then the “Label” will appear on the display between the two

values (see media screens page 3)

(The colours is only informative, they will not appear on the display)

Example:

Water 600 µS/cm 700 µS/cm

Milk 4500 µS/cm 5500 µS/cm

CIP acid 9000 µS/cm 11000 µS/cm

CIP caustic 55000 µS/cm 65000 µS/cm

English

CombiLyz, AFI4

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Žádné komentáře

Baumer CombiLyz AFI4 Uživatelský manuál Strana 11