Baumer ITDx9 Uživatelský manuál stáhnout pdf (Strana 10)

4 Electrical Connection

4.1 Risk of destruction due to electrostatic charge

During assembly follow the general ESD guidelines. Electronic parts contained in

the incremental encoder are sensitive to high voltages.

• Don‘ttouchplugcontactsorelectroniccomponents.

• Protectoutputterminalsagainstexternalvoltages.

• Individual max. operation voltages may not be exceeded, also not for a short

moment.

• UseBaumerThalheimrecommendedcableonly.

• Whenconnectingthemagneticencodertothepowersupply,itmustbeobserved,

that the supply voltage is of good quality without tension peaks. The common

supply of the magnetic encoder and inductive consumers such as break coils, re-

lays, electrical valves, choke-coils etc. is not permitted. A separate power supply

for the magnetic encoder is absolutely vital.

4.2 Interference protection

• Provide adequate shielding of encoder, resp. cable-/connectors (according to

standardDINVDE0160).

• Signal-leadsshouldberoutedatleast200mmawayfromdisturbancestoavo-

idelectro-magneticinterference(emittedbymagneticeldsoftransformers,re-

lays, magnetic-valves, high frequency appliances etc.). Also supply lines to such

equipment.

• Werecommendtoroutesignallinesintheshortestpossiblewaywithoutinterrup-

tions.

5 Warranty Exclusion and Disclaimer

5.1 The following cases result in a warranty exclusion and disclai-

mer:

• Everyotherusethandescribedinthisinstallationandoperationmanual(notde-

signated use).

• Allmodicationsandchanges.

• OpeningthedeviceordamagetheQCsealorseal-mark.

• Externaldamages,whicharecausedbyimpact,shock,pressureorexcessive

temperature.

• Falseelectricalconnection.

Electrical connection, Interference protection, Warranty

 10 Baumer_ITDx9_II_DE-EN_1309.indd

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Žádné komentáře

Baumer ITDx9 Uživatelský manuál Strana 10